System information

Markers buttons
The Markers buttons control additional track and channel settings.
Button Description
Marker 1/9
Automation Mode
Press to place the cursor at marker 1, or hold Shift and press to place
the cursor at marker 9.
When the Settings button is selected, hold the button and turn the V-
Pot to change the automation recording mode for each track and
bus track. For more information, see "Recording Track Envelope and
Keyframe Automation" on page 270.
Marker 2/10
Pan Mode
Press to place the cursor at marker 2, or hold Shift and press to place
the cursor at marker 10.
When the Settings button is selected, hold the button and turn the V-
Pot to change the current panning mode. For more information, see
"Audio panning modes" on page 444.
Marker 3/11
Track Phase
Press to place the cursor at marker 3, or hold Shift and press to place
the cursor at marker 11.
When the Settings button is selected, hold the button and press the
V-Pot to change the track phase.
Marker 4/12
Input Monitor
Press to place the cursor at marker 4, or hold Shift and press to place
the cursor at marker 12.
When the Settings button is selected, hold the button and turn the V-
Pot to change record input monitoring settings when you're using an
ASIO audio device. For more information, see "Recording audio" on
page 116.
Marker 5/13
Pre/Post
Press to place the cursor at marker 5, or hold Shift and press to place
the cursor at marker 13.
When the Pan button is selected, press the Settings button and then
hold F5 while pressing the V-Pot to change the bus or assignable
effects output fader to Pre FX or Post FX.
When the Sends button is selected, press the Settings button and
hold F5 while pressing the V-Pot to change a track's bus or assignable
effects send level to Pre Volume or Post Volume. Press the Sends
button to scroll through the available bus and effects sends.
Marker 6/14
Default
Press to place the cursor at marker 6, or hold Shift and press to place
the cursor at marker 14.
Press the Settings button and hold F6 while pressing the V-Pot on a
channel to return the channel's settings to the track defaults. For
more information, see "Setting Default Track Properties" on page
252.
USING HARDWARE CONTROLLERS539