System information
Adjusting track or bus volume
1. Press Channel or Channel to select the track or Mixing Console channel strip you want to adjust.
2. Move the fader to adjust the volume of the selected track or channel strip.
If you want to use the FaderPort knob to adjust channel volume, select the Proj button.
Adjusting track or bus panning
1. Press Channel or Channel to select the track or Mixing Console channel strip you want to adjust.
2. Turn the FaderPort knob to adjust panning for the selected track or channel strip.
Tips:
n Not all channel strips allow panning adjustment.
n If you want to use the FaderPort fader to adjust channel volume, select the Proj button.
Starting recording
1. Arm the tracks you want to arm:
a. Press Channel or Channel to select the track you want to record into.
b. Press Rec to arm the selected track for recording.
c. Repeat steps a and b for all tracks you want to arm.
2. Press Record to begin recording into all armed tracks.
3. When you're done recording, press Record again to stop.
Using a Generic Control Surface
You can configure up to five generic MIDI control surfaces to work with the Vegas Pro interface.
For information about your specific device, please refer to the manufacturer's documentation.
For more information about setting up a control surface, see "Using a Control Surface" on page 529.
Notes:
n If you have a MIDI controller that includes buttons and knobs or faders, you can use the device as
an external control device. For an example of how you can set up a generic control surface to
control tracks in your project, see "Configuring a Generic Control Surface" on page 552.
n Effects parameters cannot be adjusted with a generic controller.
550CHAPTER 30