System information
For specific information about your multimedia controller, please refer to the manufacturer's
documentation.
Contour ShuttlePro default settings
Default setup
ShuttlePro .pref files are included with your Vegas Pro installation. You can use these files to configure the
Contour ShuttlePro or ShuttlePro v2 for use with Vegas Pro.
If you have version 2.5 or later of the Shuttle Pro driver, you can use the driver's Export Settings Info
feature to create a graphical representation of your current settings.
Contour ShuttleXpress default settings
ShuttleXpress .pref files are included with your Vegas Pro installation. You can use these files to configure
the Contour ShuttleXpress for use with Vegas Pro.
If you have version 2.5 or later of the ShuttleXpress driver, you can use the driver's Export Settings Info
feature to create a graphical representation of your current settings.
Navigating the timeline with a ShuttlePro or Shuttle Xpress
Use shuttle ring and jog dial to navigate the timeline. If you're using a ShuttlePro, you can also use the
buttons in the top and bottom rows to navigate.
You can set the speed of the shuttle ring using the JKL / shuttle speed drop-down list on the Editing tab of
the Preferences dialog.
Navigating the timeline with a PowerMate or other controller
If you have a multimedia controller such as the Griffin Technology PowerMate, you can map your
controller to the F3/F9 jog/edit keys
Map the single-button function to the Enter key for Play/Pause functionality. When paused, the knob will
jog by frame.
When you use the [ or ] keys to enter event edge-trimming mode, the knob will trim the event:
n Turn the knob left or right to trim the selected event edge:
n Hold Alt while turning the knob to perform a slip trim.
n Hold Ctrl while turning the knob to change the event's playback rate.
n Hold Ctrl+Alt while turning the knob to perform an adjacent trim.
During playback, the knob will function as a variable-speed shuttle control. You can set the speed of the
shuttle control using the JKL / shuttle speed drop-down list on the Editing tab of the Preferences dialog.
558CHAPTER 30