Specifications

Falcon II Outdoor series printers – Maintenance Manual
126
AP-74065, Rev. 1.0, 21/11/03
Step 11 : Move the cursor to the opposite side of the origin.
Step 12 : Cap once.
Step 13 : Use a mirror to check that the cap does not impinge on the nozzle.
1 = Print head (nozzle face) 2 = Nozzle
3 = Cap trace 4 = Mirror
Step 14 : Reinstall all parts in the opposite order of the removal procedure.
4.8.2. Replacing the cleaner
Step 1 : Follow step 1 to 3 in "Replacing the maintenance assembly" to remove the side plate T.
Step 2 : Lift up the hooks slightly and remove the cleaner from the wiper arm.
1 = Wiper arm 2 = Cleaner
3 = Hook
Step 3 : Replace the cleaner.