Specifications

Falcon II Outdoor series printers – Maintenance Manual
172
AP-74065, Rev. 1.0, 21/11/03
1 = Adjust this area so it becomes a straight line.
2 = Check if this area is a straight line.
3 = Check if the lines of “1A and 4B” go in the centre
(Also check lines “2A and 3B”, “3A and 2B” and “4A and 1B”
Step 5 : Tighten the screw which secures the Head Fixing Plate.
Step 6 : Repeat step 1 to 5 until the adjustment is correct.
Notes :
Please note that when executing “CHECK” in the menu, the plot will not be a straight
line. A & B are alternating!