Specifications

Falcon II Outdoor series printers – Maintenance Manual
190
AP-74065, Rev. 1.0, 21/11/03
5.8.2. Parameter Update Menu
This menu updates the adjustment parameters. The parameters that can be updated through this menu are as follows.
¾ Head voltage
¾ Printing position alignment
¾ CW adjustment
¾ Media feed distance
¾ Mechanical parameter
¾ Ink parameter
¾ Ink ID mask
¾ Serial number
Notes :
¾ If you update any parameter in the Parameter Update menu, always turn the power
OFF after quitting the menu. The updated parameters will not be stored in the flash
memory unless the system power is turned OFF.
* Update *
F1 →
HeadRank PrintPos.
← F2
F3 →
CW Adj. P. FeedLen.
← F4
(1/2)
* Update *
F1 →
Mechparm Inparm
← F2
F3 →
Ink ID mask serialNo.
← F4
(2/2)