Specifications

Falcon II Outdoor series printers – Maintenance Manual
297
AP-74065, Rev. 1.0, 21/11/03
(5) The Mainboard
assembly may
have a problem
• Replace the
Mainboard
assembly
• Reset the head
error
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV
board assembly
and cooling fan
assembly.
→ Counter
initialization menu
(1) Check the
HD_SLIDE sensor
via
“Sensor/HD_SLID
E” of the self-
diagnostic function
• Make sure that
the connections of
the HD_SLIDE
sensor assembly
connectors are
good.
• Mainboard : J127
→ Sensor Menu
(2) Make sure that
the connections of
the HD_SLIDE
sensor assembly
connectors are
good.
• Replace the
HD_SLIDE sensor
assembly.
→ Replacing the
SLIDE motor
assembly,
HD_SLIDE
sensor assembly
and slide motor
installation board.
(3) The SLIDE
motor assembly
may be damaged.
• Replace the
SLIDE motor
assembly.
→ Replacing the
SLIDE motor
assembly,
HD_SLIDE
sensor assembly
and slide motor
installation board.
12 E 076 Error
PG CR origin
The HD_SLIDE
home position
cannot be detected.
(4) The Mainboard
assembly may
have a problem.
• Replace the
Mainboard
assembly.
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV
board assembly
and cooling fan
assembly.
13 E 077 Error
Head
OverHeat
Trouble occurred in
the head driver.
(1) The
HEAD_DRV board
assembly may
have a problem.
• Replace the
HEDA_DRV board
assembly.
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV
board assembly
and cooling fan
assembly.