Specifications

Falcon II Outdoor series printers – Maintenance Manual

AP-74065, Rev. 1.0, 21/11/03

Step 8 : Remove the screws fixing the PF_ENC assembly to the PF encoder installation board.

1 = PF_ENC assembly 2 = Screws (M2x6) fixing the PF_ENC assembly to

the PF encoder installation board

3 = PF encoder installation board

Step 9 : Replace the PF_ENC assembly.

Notes :

¾ When installing the PF_ENC assembly and the PF encoder installation board, make

sure they are aligned with the locating bosses.

Step 10 : Reinstall all parts in the opposite order of the removal procedure.

Step 11 : Adjust the tension of the PF deceleration belt according to "PF deceleration belt tension adjustment".