User`s guide

Operations Instruction Osprey 75/102/130
19 AP-75720, Rev. 2.0 - 28/11/2007
2 PRODUCT OVERVIEW
2.1 PARTS NAME AND FUNCTIONS
2.1.1 Front section
No. Name Function
1 Operation panel
This panel is used to set operational conditions, the status of the printer, and
other functions. (Section : Operation panel)
2 Front cover
This cover keeps the operator safe from the drive parts of the printer while it
is operating. Open and/or close the cover only when performing the
following operations.
• Media setting and replacement
• Cleaning inside the printer
• Media jamming
3 Pressurizing roller
Set inside the front cover. This roller is used to press the media from above
and keep it flat when printing.
4 Platen
Set inside the front cover. There is an ink drying device built in. On the
surface, there is a cutter groove for paper cutting.
5 Media guide
This is used to feed the media smoothly when setting the media and when
printing. There is an ink drying device built in.
6 Foot switch This switch is used to raise and lower the pressurizing roller.
7 Maintenance cover
This is a cover to protect the user from the internal components of the
product. This is opened during the following conditions:
• When Switching the unit ON or OFF
• When cleaning the print head surface.
• When cleaning the print head inside the cover.
There is a waste fluid tray to collect waste fluid from the print head.
8 Waste fluid valve
Opened when discharging waste fluid from the waste fluid tank. This is
normally closed.
Downloaded From ManualsPrinter.com Manuals