User`s guide

102 AP-75740 – Rev 1.2 – 6/07/2011
Step 4 : Wipe off the dirt of the grid roller’s unpainted (silver colour) area with damp and a tightly
squeezed soft cloth.
N° Name
1 Grid roller
5.1.3 Head cleaning
When to perform?
If the prints become blurred or are incomplete.
How to perform?
Notes
• Remove media while cleaning.
Step 1 : Verify that the operation panel is in Normal mode.
Step 2 : Verify that the media hold lever is positioned to the front side. (lever down)
Step 3 : Press the [>] key to select the cleaning mode.