User`s guide

103 AP-75740 – Rev 1.2 – 6/07/2011
Step 4 : Press the [Cleaning] key for at least 2 seconds.
Result: The operation panel displays “Cleaning **%.
Step 5 : Start the head cleaning.
Notes
• Pressing the [Cleaning] key again after the first head cleaning is done to perform a strong
cleaning.
• If you fail to remove blurs or incompleteness of printing in one head cleaning, you should
perform the strong cleaning.
• If you fail to remove blurs or incompleteness of printing with several head cleaning, refer to
Troubleshooting, and perform the adequate process.
Notes
• If you perform a cleaning and the ink level reaches its end, an ink end ink message is displayed.