User`s guide

104 AP-75740 – Rev 1.2 – 6/07/2011
5.1.4 Cleaning the wiper
5.1.4.1 Cleaning time
Once a week or when blurs or incompleteness in printing remain after head cleaning.
5.1.4.2 Cleaning
steps
Notes
• Use the poly-knit wiper when cleaning the wiper.
Step 1 : If the printer is switched ON, make sure that:
• Printing or other operations are not in progress.
• The display is in the normal state.
Step 2 : Press the [Enter] key.
• The printer starts cleaning the wiper.
• The operation panel displays "CR Maintenance: End".
Step 3 : Open the front cover.
N° Name
1 Front Cover
Notes
• While cleaning the wiper
o Do not touch the wiper and head cap unit with your hands,
o Head cleaning may not be performed correctly because of the grease on your hands.