User`s guide

116 AP-75740 – Rev 1.2 – 6/07/2011
6.2 ERROR MESSAGES
6.2.1 Status messages
This section describes the display during the printer operation.
When the product is operating correctly, the operation panel displays each operation status as below.
Message Remedy
Ready to Print Idling (Media is set).
Paper End Idling (Media is not set).
Receiving [port*] Receiving data. (* displays a port no.)
Converting [port*] Analyzing data. (* displays a port no.)
Under printing Printing.
Warming Up Warming up the heater.
Cleaning **% Cleaning the head. Please wait a while.
Ink Refill **% Filling the ink. Please wait a while.
Washing
Cleaning the print head in the head cleaning process. Please wait a while.
Moving Origin Pos.
The print head is moving to the original printing position on the Origin setup menu.
Please wait a while.
Confirm Position →E
The print head is moving to the original printing position on the Origin setup menu.
Press the [Enter] key.
Remove Cassettes
Cleaning the head.
Insert the cleaning cassette.
** Initialling **
Initializing the setting on the Initialization menu. Please wait a while.
** Press 2sec. **
The [Cleaning] key or the [Nozzle Check] key is pressed for less than 2 seconds.
Press the key for more than 2 seconds again.
Insert CleaningCart.
Filling the cleaning fluid
Insert the cleaning cassette.
Insert InkCassettes
Filling the ink.
Insert an ink cassette.
Transport Mode Preparing for transportation. Please wait a while.
Media: Type ** OK?
Initializing the media.
Please wait a while.
(*** represents the setup media type.)
Paper Initial
Cover Open The front cover is open.
Lever Up The media hold lever is positioned backward. Set the media.
Layout Receiving
After receiving print data, the printer is waiting for receiving the next data.
Displayed when the layout function is enabled.