User`s guide

User’s Guide ValueJet 1204
Chapter 3: Installing the Unit
26 AP-75740 – Rev 1.2 – 6/07/2011
3.1 INTRODUCTION
This section explains how to fully install the assembled printer. For further information on how to assemble
your ValueJet printer, please refer to the Installation Guide.
3.2 INSTALLATION SPACE
Install on a level floor which meets the following conditions.
It has enough strength to support the weight of the printer and the stand
Notes
• For the weight of the printer and the stand, refer to the Operation Manual.
A 500 mm E 1440 mm
B 1000 mm F 3000 mm
C 1000 mm G 2660 mm
D 1000 mm