User`s guide

User’s Guide ValueJet 1204
Chapter 3: Installing the Unit
34 AP-75740 – Rev 1.2 – 6/07/2011
Step 2 : Take out the cleaning cassette from the solvent resistant blister.
Step 3 : Install the cleaning cassette into the ink cassette slot.
• Keep the ▲ mark of the cleaning cassette facing up and insert it into the slot of the printer.
• Insert the cleaning cassette to the end of the slot.
N° Name
1 Cleaning cassette
2 Ink cassette slot
• The printer starts filling cleaning fluid.
Step 4 : After cleaning fluid has been filled, take out the cleaning cassette.
• "During washing" is displayed and the printer starts head cleaning
• "Insert Ink cassettes" is displayed after the head cleaning.
Step 5 : Take out the ink cassette from the solvent resistant blister and shake it gently 2-3 times.
• The slots for the ink cassettes are specified depending on the colours of ink cassettes. Match
the colour marked by the side of each slot with the colour of the ink cassette.
• Keep the ▲ mark of the ink cassette facing up and insert it into the slot of the printer.
• Insert the ink cassettes in the printer as follows :
• The ink cassettes must be inserted in a specific slot according to the type and colour used.
• Insert the cassettes with the arrow mark “▲” face-up and pointing to the rear of the printer.
• Insert the cassettes as far as possible.
• Install all four colours.
N° Name
1 Ink cassette
2 Ink cassette slot K
3 Ink cassette slot C
4 Ink cassette slot M
5 Ink cassette slot Y