User`s guide

User’s Guide ValueJet 1204
Chapter 3: Installing the Unit
42 AP-75740 – Rev 1.2 – 6/07/2011
Step 8 Verify that the power light faints when the ink rejection operation is finished.
Step 9 Dispose the waste fluid.
Step 10 Remove the scroller.
Step 11 Remove all cables.
Step 12 Open the front cover and fix the CR belt in the centre section of the printer by fastening the CR
belt clip around.
N° Description
1
CR belt
2
CR belt clip
Step 13 Place the metal plate and fix it with the butterfly screw. The head is now fixed.
N° Description
1
Metal plate
2
Butterfly screw