User`s guide

User’s Guide ValueJet 1204
Chapter 3: Installing the Unit
45 AP-75740 – Rev 1.2 – 6/07/2011
Step 6 Loosen the 2 hexagon head cap screws to detach the right support from the caster section.
N° Description
1
Right support
2
Caster lock
3
Caster section
4
Hexagon head cap screws
Step 7 Detach the left leg from the stand in the same way as the previous step.
Step 8 Now that every component is detached, repack everything in the original packing box before
transporting the machine.
3.9 STEPS AFTER TRANSFER
Step 1 : Choose a suitable place for installation and place the printer.
See “Installation guide”
Step 2 : Verify that the butterfly bolts fixing the stand with the printer are tight.
Step 3 : Connect all cables.
Step 4 : Perform a nozzle check, and verify that there is no clogging in the printer head.
See “Nozzle check”
Step 5 : Perform a head alignment.
See “Adjust print”