User`s guide

User’s Guide ValueJet 1204
Chapter 4: Handling the printer
49 AP-75740 – Rev 1.2 – 6/07/2011
4.1 INTRODUCTION
This section describes how to make the fully-installed printer “ready-to-print”. For details on how to obtain a
fully installed printer, see chapter “Installing the unit”
4.2 MAKING THE PRINTER READY-TO-PRINT
Starting point: FULLY- INSTALLED VALUEJET
↓
Step Action Reference
1
Choose the appropriate media.
General info on usable media
2
Install and load the media.
Installing roll media
Loading roll media
3
Set the media type
Setting media type
4
OPTIONAL : Adjust the head height
Head Height Adjustment
5
Set the printing conditions.
Menu setup on the operation panel
6
OPTIONAL: Perform (a) test plot(s)
and perform adjusting, cleaning and
replacing actions when needed.
Test Print
↓
Result: READY-TO-PRINT VALUEJET