User`s guide

User’s Guide ValueJet 1204
Chapter 4: Handling the printer
61 AP-75740 – Rev 1.2 – 6/07/2011
Step 3 : Close the front cover.
N° Name
1 Front cover
4.4.5 Media feed compensation
After every printed swat, the media is fed a certain distance. Depending on the kind of media (weight,
backing) another media feed compensation has to be set. This to avoid the following phenomenon:
• Printed swats overlap.
• White lines between every swat.
In such cases, follow the procedure below and adjust the media feed compensation value.
Step 1 : Display the Media feed compensation menu on the operation panel.
• Press the [Menu] key.
o Shift to the Setup menu display.
o The operation panel displays "Menu 1: Setup>".
• Press the [>] key.
o The operation panel displays "Set1: MediaType".
• Press the [Enter] key.
o The operation panel displays "Media: Type 1".
• Press the [+] or [–] key to select the media type you wish to use.
• Press the [Enter] key.
o The operation panel displays "**>1: Print Mode".
Notes
• The selected media (Type 1-30) is displayed in "**". Please refer to “Media Type menu”
• Press the [+] or [–] key to select "**>2: PF Adjust>".
• Press the [>] key.
o The operation panel displays "PF1: Init.Adj.Print".