User`s guide

User’s Guide ValueJet 1204
Chapter 4: Handling the printer
63 AP-75740 – Rev 1.2 – 6/07/2011
Notes
• The length that media is fed (feeding length) for confirmation printing is set at 250 mm.
• If you make the feeding length longer, the accuracy of the Media feed compensation improves.
If you want to change the feeding length, press the [+] or [–] key and change the set value.
• Press the [Enter].
o The operation panel displays "Printing".
o Start Confirmation adjustment printing.
N° Name
1 Feed length
2 Media feeding direction
After the confirmation adjustment printing, cut the media. Refer to “Cutting media”
Step 6 : Measure the distance between two pluses in the confirmation adjustment print using a ruler.
Then, confirm that the distance matches the feeding length when printing.
• If the distance does not match the feeding length, follow the procedure from 1 to 5 and
readjust.
• If the distance matches the feeding length, proceed to step 7.