User`s guide

User’s Guide ValueJet 1204
Chapter 4: Handling the printer
70 AP-75740 – Rev 1.2 – 6/07/2011
4.5.3 Nozzle check
Used to check whether there are any heads clogging, missing nozzles or misfiring nozzles.
Notes
• If the nozzle check result indicates that the checked points are blurred or missing, clean the
head. Refer to Head cleaning.
Perform the nozzle check once again after cleaning the head.
Notes
• For the printing procedure, refer to “Performing a test print”.
4.5.4 Mode Print
Used to confirm the following printing conditions:
• Print mode
• Pre heater set temperature
• Fixer (Platen) heater set temperature
• Drier heater set temperature
• Adjustment value
Notes
• For the printing procedure, refer to “Performing a test print”.