User`s guide

User’s Guide ValueJet 1204
Chapter 4: Handling the printer
73 AP-75740 – Rev 1.2 – 6/07/2011
4.6 ADJUST PRINT
Used to align the print head.
Notes
• This printer is adjusted for optimum print quality before shipment at the Mutoh factory.
• Align the print head when the print quality decreases after the installation environment or the
media has been changed.
Step 1 : Switch on the printer.
Step 2 : Load more than A3 size print media.
Step 3 : Confirm that the printer functions normally.
Step 4 : Press the [Menu] key.
Result:
• The operation panel displays "Menu 1: Setup>".
• Shift to the Setup menu display.
Step 5 : Press the [–] key twice.
The operation panel displays "Menu 3: Adjust. Print>".