User`s guide

User’s Guide ValueJet 1204
Chapter 4: Handling the printer
81 AP-75740 – Rev 1.2 – 6/07/2011
4.8.1.2 Print Mode menu
Set up the printing quality (print mode) according to the used to print data or print speed.
Setup item Setting Value Description
Mode Quality 1 Set up the print mode.
• Quality 1 to 4:
Set up to perform high quality printing.
• Graphics 1 to 2:
Set up to perform standard printing.
• Banner 1 to 4:
Set up to perform high speed printing.
Display the printing mode while pressing [>] key.
Details of the print mode
Notes
When setting "Banner 1" or "Banner 2" in the Print Mode menu,
"PalettePrint" is not displayed in the Test Print menu.
Quality 2
Quality 3
Quality 4
<Graphics 1>
Graphics 2
Banner 1
Banner 2
Banner 3
Banner 4
---
• [Enter] key: Save the setting and shift to the previous hierarchy.
• [Cancel] key: Cancel the setting and shift to the previous hierarchy.
” User media menu”
Details of the print mode
The printing quality mode settings are as follows.
Print mode Resolution Print speed Pass Direction
Quality 1 1440×1440 dpi Q (high quality) 16 times Uni (unilateral)
Quality 2 1440×720 dpi Q (high quality) 8 times Uni (unilateral)
Quality 3 720×720 dpi Q (high quality) 8 times Uni (unilateral)
Quality 4 720×720 dpi Q (high quality) 8 times Bi (bidirectional)
Quality 5 * 720×720 dpi N (normal) 8 times Bi (bidirectional)
Graphics 1 720×720 dpi N (normal) 8 times Uni (unilateral)
Graphics 2 720×720 dpi N (normal) 8 times Bi (bidirectional)
Graphics 3 * 720×720 dpi N (normal) 8 times Bi (bidirectional)
Banner 1 540×720 dpi N (normal) 6 times Uni (unilateral)
Banner 2 540×720 dpi N (normal) 6 times Bi (bidirectional)
Banner 3 720×720 dpi Q (high quality) 4 times Uni (unilateral)
Banner 4 720×720 dpi N (normal) 4 times Bi (bidirectional)
Notes
• Print modes are only selectable via RIP and not visible on the VJ-1204 panel.
4.8.1.3 Dist.Adj menu
Various settings on the Media feed compensation can be set.
Setup Item Setting Value Description
PF Init.Adj.Printv Perform the initial adjust print.
Init.Adj.Change Set up Initial Adjust Change.
Confirm Print Perform the Confirm Print.
Micro Adj. Print Perform the Micro Adjustment Print
Micro Adj.Change Set up the Micro Adjustment Change.
—
• [Cancel] key: Shift to the previous hierarchy.