User`s guide

User’s Guide ValueJet 1204
Chapter 4: Handling the printer
85 AP-75740 – Rev 1.2 – 6/07/2011
4.8.2 Effect menu
Set up the Effect menu.
Use this menu to improve the print quality by means of intelligent interweaving print algorithms (i²)
Setup Item Setting Value Description
Effect
None 1 The Effect function is not used. If obvious white lines or uneven print
density appears on the printed media in “None 1”, set to “None 2”
None 2
Wave 1 The printing joint will be the wave form. It will improve the print quality. If
obvious white lines or uneven print density appears on the printed
media in “Wave 1”, set to “Wave 2”
Wave 2
Fuzz 1 The printing joint will shade off as the wave form. Set up this menu
when obvious white lines or uneven print density appears on the printed
media in the “Wave” setting.
Fuzz 2
WOW 1 Set when colours become irregular. If irregular colours are not fixed
using “Wow 1” set to “Wow 2”
WOW 2
Fine&Wave 1 Perform printing at a slow speed compared with “Wave”. Set up this
menu when improving the print quality compared with “Wave”. If
obvious white lines or uneven print density appears on the printed
media in “Fine&Wave 1”, set to “Fine&Wave 2”.
Fine&Wave 2
Fine&Fuzz 1 Perform printing at a slow speed compared with “Wave”. Set up this
menu when improving the print quality compared with “Wave”. If
obvious white lines or uneven print density appears on the printed
media in “Fine&Fuzz 1”, set to “Fine&Fuzz 2”.
Fine&Fuzz 2
A-S. Fine&Wave Performs “Wave” printing using one side of the nozzles of the print
head. Since you are using only one side of the nozzles, the print speed
is reduced by half of “Wave 1” and “Wave 2” Set up this menu when
improving the print quality compared with “Fine&Wave1” and
“Fine&Wave2”
B-S. Fine&Wave Performs “Wave” printing using the other side of the nozzles of the print
head. Since you are using only one side of the nozzles, the print speed
is reduced by half of “Wave 1” and “Wave 2” Set up this menu when
improving the print quality compared with “Fine&Wave1” and
“Fine&Wave2”
-
4.8.3 Flushing menu
Set up the Flushing operation while printing.
Setup Item Setting Value Description
Flushing Origin Every time the print head goes and returns. The flushing
operation is performed in the flushing box.
<On Media> Perform the flushing operation on the page margins.
Improves the print quality since returning to the flushing box.
—
• [Cancel] key: Cancel the setting and shift to the previous
hierarchy.