User`s guide

User’s Guide ValueJet 1204
Chapter 4: Handling the printer
89 AP-75740 – Rev 1.2 – 6/07/2011
4.8.10 Overwrite Cnt menu
Set up the Overwrite Cnt per line.
Setup Item Setting Value Description
Overwrite Cnt <once> to 9 times Set the overwrite count.
—
• [Enter] key: Save the setting and shift to the previous
hierarchy.
• [Cancel] key: Cancel the setting and shift to the previous
hierarchy.
4.8.11 Overwrite Wait menu
Set up the waiting time while overwrite printing.
Notes
• The heater is not warming the media enough, causing less printing quality. In this case, set the
Overwrite Wait time and warm up the media.
Setup Item Setting Value Description
Overwrite Wait <0s> to 0.1s to 5.0s Set the Overwrite Wait time.
—
• [Enter] key: Save the setting and shift to the previous
hierarchy.
• [Cancel] key: Cancel the setting and shift to the previous
hierarchy.
4.8.12 Slant Check menu
Set up the slanting detection while loading the media.
Setup Item Setting Value Description
Slant Check Off Slant Check is not performed.
<On> Slant Check is performed.
—
• [Enter] key: Save the setting and shift to the previous hierarchy.
• [Cancel] key: Cancel the setting and shift to the previous
hierarchy.
4.8.13 Auto Cleaning menu
Set the auto cleaning interval of the printer. Prevents the print head from clogging.
Setup Item Setting
Value
Description
Waiting time (cleaning
during standby)
0...360...1440
min
0: no auto cleaning is done <Value>: when <value> elapsed,
the cleaning cycle selected in the panel is executed
Printing time (cleaning
during printing)
0...5...180 min 0: no auto cleaning is done <Value>: when <Value> elapsed,
the cleaning cycle selected in the panel is executed.
before print [OFF] / [ON] ON: cleaning cycle selected in the panel is executed before
printing starts
4.8.14 Ink Status menu
Display information (ink status) of ink cassette that installed into the ink cassette slot.
Notes
• When displaying the Ink Status menu, use the genuine ink cassette. When using ink cassette
other than the genuine ones, the ink status will not be displayed correctly.
Setup Item Setting Value Description
KCMY 0 - 100 (Unit: %) Residual ink quantity of K, C, M and Y colour is displayed.