User`s guide

User’s Guide ValueJet 1204
Chapter 4: Handling the printer
91 AP-75740 – Rev 1.2 – 6/07/2011
4.8.17 CR Maintenance menu
Clean the wiper.
Setup Item Setting Value Description
CR Maintenance Start Clean the wiper.
• [Enter] key:
The print head moves to centre.
The wiper moves forward.
End Cleaning the wiper is complete.
• [Enter] key:
Print head returns to the original position.
The wiper returns to the original position.
—
• [Cancel] key: Shift to the previous hierarchy without the wiper
cleaning operation.
4.8.18 Initialization menu
Setup Item Setting Value Description
Initialization ALL All settings can be returned to factory default.
MediaType The settings of the MediaType menu are returned to factory default.
Except MediaType The settings other than the MediaType menu are returned to factory
default.
—
• [Enter] key:
Display "Initialling" on the operation panel, and initialize the setting.
• [Cancel] key: Shift to the previous hierarchy without initialization.
4.8.19 Life Times menu
Displays the operational life time of each part.
Setup Item Setting Value Description
Life Times Head Display the operational life of each part.
• Five asterisks (=100%) display the operational life of a part.
• As the part deteriorates, the number of asterisks decreases one by
one (20 %).
• The part should be changed when all of the asterisks have
disappeared, and "Change" is displayed.
Pump
CR Motor
PF Motor
—
• [Cancel] key: Shift to the previous hierarchy.
Notes
• Do not keep using a part that reached its life span to keep the part its warranty.
4.8.20 IP Address menu
Notes
• Be sure to set the IP address after consulting your network administrator.
Setup Item Setting Value Description
IP Address 000.000.000.000~
<192.168.001.253>~
255.255.255.255
Use following keys to change the IP address:
• [+] key: Increase the value.
• [–] key: Decrease the value.
• [Enter] key: Change the value for the next segment.
—
• [Cancel] key: Save the setting and shift to the previous
hierarchy.