Instruction manual

VJ-1204 QUICK REFERENCE

3 Basic usage 3-13

3 Basic usage

3.5 Setting media

This section explains how to set media and settings for each media type.

NOTE

• Refer to the following for details about handling media.

"4.2 Media" in the Operation Manual

• Refer to the following for types and details of recommended media.

"4.2.1 Media type" in the Operation Manual

"8.3 Options/Supply list" in the Operation Manual

3.5.1 Loading roll media

This section explains how to load roll media.

Use the exclusive scroller included with this printer for loading roll media.

NOTE

• The following roll media can be set on the scroller included with this printer.

• Media tube diameter: three inches, outside diameter of media: 150 mm or less,

weight: 19 kg or less

Follow the procedure below to load roll media.

CAUTION

• Load roll media on an even surface such as a desk.

If you load roll media with the scroller standing vertical, there is a possibility that the

scroller might get damaged.

1. Load roll media to the scroller so that it is rolled in an anti clockwise direction when viewed from the

fixed flange.

2. Push the roll media until its core hits the right edge of the fixed flange.

No. Name

1 Fixed flange

2 Roll media