Instruction manual

VJ-1204 QUICK REFERENCE

4 Daily maintenance 4-3

4 Daily Maintenance

NOTE

• Use genuine ink cartridges for replacement.

This printer is designed to use genuine ink cartridges. If you use an ink cartridge that

is not a product of the original manufacturer,

• Printing might become blurred, or the end of the ink in the cartridge might not be

detected correctly.

• Any problems caused by using an ink cartridge other than those recommended

above will not be covered by the warranty, and repair expenses will be paid by the

customer.

(3) Replacing steps

Follow the procedure below to replace the ink cartridges.

CAUTION

• When handling ink cartridges, pay attention so that ink does not get into your eyes or

stick to your skin. If ink gets into your eyes or sticks to your skin, immediately wash

it off with water.

Failing to do so might cause irritation or light inflammation of eyes. In case of any

abnormality, consult a physician immediately.

• Do not disassemble ink cartridges. If disassembled, there is a possibility that ink

might come into contact with eyes or skin.

NOTE

• Do not give ink cartridges strong shakes. Doing so may cause ink leakage.

• Do not disassemble ink cartridges. A disassembled ink cartridge cannot be used.

• When an ink cartridge is moved from a cold place to warm place, keep the ink

cartridge for three hours or more in the new printing environment before printing.

• Do not refill an ink cartridge with ink.

It may result in abnormal printing.

• Insert or remove the ink cartridge at the time of replacement only.

Inserting or removing the ink cartridge except at the time of replacement may result

in incorrect printing.

1. Confirm that the printer is turned ON.

NOTE

• Do not replace ink cartridges when the printer is turned OFF. The remaining ink

may not be detected correctly, causing abnormal printing.