User`s guide

Operation Instructions VJ-1204
22
AP-77170, Rev. 2.0, 2/04/2007
2.5.2 Mounting the stand to the printer
Step 0 : Lock the two casters on the front side of the stand as shown on the image below.
No. Name
1 Casters
2 Caster locks
Step 0 : Lift the printer main body by way of the hand grips (1), and align the rear side rubber feet (3) with
the holes of the stand.
Notes
• On top of each leg as well as on the underside of the printer body there are arrows pictured. To correct
install, make sure that the arrows of the legs point in the same direction of the arrow on the body.
No. Name
1 Hand grips
2 Rubber grips
3 Rubber feet
4 Media guide