User`s guide

Operation Instructions VJ-1204

AP-77170, Rev. 2.0, 2/04/2007

2.7.2 Transporting the printer

When transporting the printer, it is necessary to pack the printer as it was shipped, using the protective

materials and packing materials to protect the printer from vibration and shocks.

Notes

• When transporting the printer, consult your MUTOH product dealer.

(0) Pre- transport procedure

Step 0 : Switch ON the printer.

Step 0 : Verify that the printer is in Normal mode.

Step 0 : Remove all ink cassettes.

Step 0 : Switch OFF the printer.

• Result: The operation panel displays "Transport Mode", and the printer starts the ink rejecting

operation.

• The ink rejecting operation takes about 2 minutes.

Step 0 : Verify that the power light faints when the ink rejection operations has been finished.

Step 0 : Remove the scroller.

Step 0 : Remove all cables.

Step 0 : Attach the protective material (metal plate) for attaching the head unit (1), and fix it with

thumbscrews (2).

No. Name

1 Protective material (metal plate) for attaching the head unit

2 Thumb screw

Step 0 : Remove the printer from the stand. See Installation guide

Step 0 : Repack the printer.

(0) Post-transport procedure

Step 1 : Perform unpacking, assembling, and placing the printer. See Installation guide

Step 1 : Set the printer in an available condition. See “Transferring the printer” and “Steps after

transfer”