User`s guide

Operation Instructions VJ-1204
34
AP-77170, Rev. 2.0, 2/04/2007
3.5 MEDIA HANDLING
3.5.1 Installing roll media
Step 2 : Remove the movable flange from the scroller.
Step 2 : Install the optional three-inch core adapters :
• If using media on a 2 inch core: Don’t use the three-inch core adapters, go to step 3.
• If using media on a 3 inch core : Click a three-inch core adapter (3) on the
fixed flange (2) and the movable flange (1) as shown on the image below.
No. Name
1
Movable flange
2
Fixed flange
3
Three-inch core adapter
Step 2 : Put the roll media on the scroller.
Step 2 : Push the roll media (2) on the scroller and slide it over the fixed flange (1).
1
2
No. Name
1
Fixed flange
2
Roll media
Step 2 : Move the movable flange (1) over the scroller and firmly press the flange inside the
roll media core. See image below.
2
1
No. Name
1
Movable flange
2
Roll media
Step 2 : Put the scroller (1) on the printer’s scroller receiver (4) so that the fixed flange (2) is facing the
ink cassette slot side. See image below.
1
2
4
4
3
No. Name
1
Scroller
2
Fixed flange
3
Ink cassettes
4
Scroll receiver
Make sure to attach or detach the scroller bar horizontally