User`s guide

Operation Instructions VJ-1204
40
AP-77170, Rev. 2.0, 2/04/2007
3.5.4 Setting media type
Introduction:
When you have loaded the media in the ValueJet, you’ll have to set the media type. The Media setup menu
is displayed after the media hold lever is pushed from the backward position to the forward position. (= lever
down)
1
No. Name
1 Media hold lever
Notes
• The printer starts the media initialization without setting the media type when
o The [Cancel] key of the operation panel is pressed.
o No key operations are performed on the operation panel for 10 seconds.
Procedure:
Step 1 : Verify that the printer has been switched ON, and the media has been loaded.
Result: After the media is loaded, the display shifts to the Media setup menu.
Notes
• Refer to the following topics for media loading:
o Installing roll media
o Loading roll media