User`s guide

Operation Instructions VJ-1204

AP-77170, Rev. 2.0, 2/04/2007

3.6 PERFORMING A NOZZLE CHECK

Step 5 : Verify that the printer has been switched ON and that media -roll or sheet- more than A3 size

has been loaded.

Step 5 : Verify that the printer is in normal mode – Ready to Print.

Step 5 : Press the [Menu] key on the operation panel.

Result: · Menu1 – Setup is displayed

Step 5 : Press the [Setting value-] key on the operation panel to select the Menu2 – Test Print > option

Step 5 : Confirm your Menu2 selection by pressing the [>] key panel button.

Step 5 : Make use of the [Setting value +] key or [Setting value-] key on the operation panel to select

‘NozzleCheck’ and press the [Enter] key.

Result: Printing of the Nozzle check pattern starts. See image below.