User`s guide

Operation Instructions VJ-1204
49
AP-77170, Rev. 2.0, 2/04/2007
4 PERIODICAL MAINTENANCE
4.1 DONE BY END USER
Be sure to read and understand the safety warnings before handling the printer.
maintenance frequency Parts needed
Outer case Daily Soft cloth
Inside the printer Daily soft brush / soft cloth
Head cleaning
If print become blurred or
incomplete
-----
Cleaning the wiper
Once a week or when blurs or
incompleteness in printing remain
after head cleaning
Poly-knit wiper
Replacing waste fluid tank
Replace if
“NearFullWasteInkTank” is
displayed on the operation panel.
***
Replacing spitting box absorbent
When the spitting box absorbent
becomes deformed, when smears
of ink appear on the media or two
months after replacement
***
***: Please contact your local Mutoh reseller for ordering parts.
4.1.1 Cleaning the outer case
Instruction: Wipe off the dust and possible dirt from the outer case by using a soft cloth.