User`s guide

Operation Instructions VJ-1204
52
AP-77170, Rev. 2.0, 2/04/2007
4.1.3 Replacing the spitting box absorbent
(1) Pre- transport procedure
Replace the spitting box absorbent in the following situations.
• When the spitting box absorbent becomes deformed.
• When smears of ink appear on the media
• Two months after replacement.
(1) Replacing steps
Step 2 : If the printer is turned ON, make sure that:
• Printing or other operations are not in progress.
• The operation panel display is Normal.
Step 2 : Perform the CR maintenance.
• The display enters the CR maintenance menu.
• “CR Mainte.: Start” is displayed on the operation panel.
Step 2 : Press the [ENTER] key on the operation panel.
• Maintenance starts
• The print head moves on the platen.
• “CR Mainte.: END” is displayed on the operation panel.
Step 2 : Open the front cover.
1
No. Name
1 Front cover.
Step 2 : Lift the spitting box sponge hook and release the hook. Then, remove the spitting box sponge
holder.
No. Name
1 Spitting box sponge
2 Spitting box sponge holder