User`s guide

Operation Instructions VJ-1204

AP-77170, Rev. 2.0, 2/04/2007

4.1.4 Head cleaning

When to perform?

If the prints become blurred or are incomplete.

How to perform?

To perform a head cleaning, follow the steps below.

Notes

• Remove media while cleaning.

Step 4 : Verify that the operation panel is in Normal mode.

Step 4 : Verify that the media hold lever is positioned to the front side. (lever down)

Step 4 : Press the [>] key on the operation panel to select the cleaning mode.

Step 4 : Press the [Cleaning] key on the operation panel for at least 2 seconds.

Result: The operation panel displays “Cleaning **%.