User`s guide

Operation Instructions VJ-1204
59
AP-77170, Rev. 2.0, 2/04/2007
4.2 DONE BY AUTHORIZED MUTOH TECHNICIAN
This section describes the periodical part replacements and the periodical inspections required for this
printer.
These periodical services ensure the stable printing quality of the printer.
4.2.1 Periodical replacement of parts
Perform periodical replacements according to the table below. These replacements should be executed by
an authorized Mutoh technician. These replacements are necessary to ensure the best printing quality
output.
Part Timing
Maintenance station Once year
Wiper Once year
Damper Once year
4.2.2 Periodical Inspection Part List
Perform periodical inspections according to the table: “Periodical Inspection Part List” and perform cleaning
and part replacement as necessary.
Part Timing Check point
Media guide L
Sub platen front surface
Once year
• Media dust accumulation
• Foreign objects
• Damages
Timing fence
(CR encoder detection slit plate)
Once year
• Media dust accumulation
• Foreign objects
• Damages
Rail on the CR guide frame Once year
• Foreign objects
P_REAR sensor front surface Once year
• Media dust accumulation
• Foreign object