Quick Installation Guide

e 9

3.3. Pre-Installation Checklist

There are two (2) components: the transmitter and the

receiver.

1. The transmitter is connected to the video source,

usually a PC, by a VGA jumper cable (not included).

2. A local monitor can be connected to the transmitter

by a VGA jumper cable (not included).

3. The transmitter is connected to the receiver by

Category 5e/6 (or higher) UTP cable (not included).

4. The receiver is connected to the display equipment,

usually a projector or screen, by a VGA jumper

cable (not included) or directly on the equipment.

5. Verify that the desired image resolution is within the

specification of the Active VGA Balun II Kit.