Spec Sheet

CATV Balun II
500302
______________________________________________________________________________________________
©MuxLab Inc. 2005-2009 CATV Balun II
Head Office
8495 Dalton Road, Mount Royal, Quebec, Canada, H4T 1V5
Tel: [phone] Fax: [phone]
Toll Free: 877 689-5228
E-mail: [e-mail]
URL: www.muxlab.com
Typical Application:
In a point-to-point scenario for CATV (superband and hyperband), VHF and FM, cable lengths of up to 50 meters may
be achieved without amplification if the nominal input is about 15dB. In some applications, a “tilt” amplifier may be
required since the UTP losses are higher than coax at the higher frequencies. Linear gain compensation of up to 20-
25dB at 750MHz is usually adequate. Conversely, if amplification is used to compensate for losses at higher
frequencies and long distances, it may be necessary to attenuate the lower frequency, shorter distance signals to
avoid over-driving the TV monitors.