Instruction Manual

e 10

3.3. Pre-Installation Checklist

There are two (2) components that must be verified

before installation can begin: The transmitter and the

receiver.

1. The transmitter is connected to the VGA video

source, usually a PC or Laptop computer, via VGA

video & audio cables (not included).

2. The transmitter is connected to the receiver by a Cat

5e/6 (or higher) unshielded twisted pair cable (not

included).

3. The receiver is connected to the display equipment,

usually a projector or screen, via VGA video &

audio cables (not included).

4. Verify that the desired image resolution is within the

specifications of the Active VGA/Audio Balun Kit.