Instruction Manual

e 15

19. The following table provides suggested rotary

switch settings for adjusting picture brightness.

Brightness Setting Actual Gain

Less -25%

None 0%

Medium 25%

High 50%

Table 1: Rotary Switch Settings for Brightness

Adjustment

20. To adjust picture sharpness, begin with the

sharpness potentiometer (“Sharp”) rotated

completely counterclockwise, and slowly rotate it in

the clockwise direction until picture details become

clear.

Note: For display equipment with automatic brightness control

(for example, certain models of projectors), complete all

installation procedures and ensure that the brightness rotary

switch (“Bright”) is set to “None” and the sharpness

potentiometer (“Sharp”) is rotated completely counterclockwise

before turning the display equipment on. Otherwise, the display

could override the brightness adjustment feature of the Active

VGA/Audio Balun Kit.