Datasheet

LongReach 16 Active CCTV Receiver Hub

Some CCTV systems integrators are specifying that remote power, PTZ control and video be

transmitted via one 4-pair Cat5 cable. In this application, the Cat5 cable may be terminated on

the CCTV Pass-Thru Balun. In order to determine the maximum distances for remote power,

please refer to the CCTV Balun Application Guide available in pdf format at

http://www.muxlab.com/assets/files/application_guides/VE_CCTV_Balun.pdf, or download the

MuxLab Distance Calculator (20MB) by clicking on the following link:

http://www.muxlab.com/assets/files/application_notes/DistanceCalculator.zip

The RJ45 pin configuration of the CCTV Pass-Thru Balun (500022) follows the EIA/TIA

568B standard as shown in the following diagram and is compatible with the wiring described

above for the hub.

CCTV Pass-Thru Balun (500022)

RJ45 Jack EIA/TIA 568B

Pair 4

Pair 3

Pair 2

Pair 1

White solid/Brown band Video (T)

Brown solid/White band Video (R)

Green solid/White band Power (Black wire)

White solid/Green band Power (Red wire)

White solid/Orange band Power (Red wire)

Orange solid/White band Power (Black wire)

White solid/Blue band Control +

Blue solid/White band Control -

1 2 3 4 5 6 7 8