Datasheet

LongReach 16 Active CCTV Receiver Hub

Relocation of DVR Head-end

In some older installations, it is necessary to relocate the DVR head end while preserving the

original camera cabling intact. In the original installation, coax cables were fed to a DVR room.

The DVR equipment was subsequently moved to a new location further away and new Cat5

cabling was installed. MuxLab’s Passive CCTV Hub (500130) may be used to convert the

original sixteen (16) coaxial cables at the old location to Cat5. The LongReach 16 Active Hub

(500122) is used to restore the signals to coax and compensate for the extended distance at the

new DVR location. The following diagram illustrates.