Datasheet

LongReach 16 Active CCTV Receiver Hub
© MuxLab Inc.2004-2006 16
Spare Power Supply
In the event that a spare power supply is required for the LongReach 16, it is recommended to
purchase a replacement supply from a local CCTV distributor. In North America, the power
supply must be rated at minimum 60VA (24VAC/2.5A). The following link shows an
acceptable power supply available from Altronix.
Altronix Model DVT1 – 115V/24VAC/80VA
http://www.altronix.com/p_pdf/DVT1.pdf
Useful Links
CCTV Labs (Australia) sells a CCTV test chart that may be used to check the performance of
CCTV equipment. http://www.cctvlabs.com/TestChart/testchart.html
Conclusion
The LongReach 16 is designed to facilitate CCTV cabling by further integrating it into the
structured cabling system. In order to ensure reliable operation, it is important to verify the type
of equipment being used, the type of cable, and the distance required before proceeding with an
installation. If additional information is required, please contact MuxLab Sales or Customer
Technical Support for assistance.