Datasheet

LongReach 16 Active CCTV Receiver Hub

The hub may be installed up to 500 ft from the receiver (DVR, mux), thereby allowing the hub

to be installed in a remote wiring or equipment room for greater cabling flexibility. The following

diagram shows how the hub works in conjunction with a “110” patch panel system. The patch

panel features RJ45 modular jacks in front and “110” style punchdown connectors on the rear

panel.

The camera inputs arrive at the RJ45 side of the patch panel. On the rear panel, the individual

twisted pairs from the CCTV hub are terminated on punch down connectors. Remote power

and/or PTZ control may be inserted into the Cat5 cable at the “110” panel. From the CCTV

hub, bulk Cat5 cables transmit the camera signals to the DVR or mux where they terminate on

CCTV Screw Terminal Baluns (500009).