Datasheet

LongReach 16 Active CCTV Receiver Hub

The following diagram shows how remote power and PTZ control may be inserted at a “110”

style punch-down block. A similar procedure could be used for 66, BIX and Krone

interconnect hardware. The diagram shows MuxLab’s recommended convention to work in

conjunction with the CCTV Pass-Thru Balun (500022).

At the camera end, Cat5 4-pair cables carry video and/or power and control to each camera.

If only video is required, the connections terminate on the CCTV Modular Balun (500000),

CCTV Screw Terminal Balun (500009) or CCTV Mini Balun (500023) as shown below.

Blue Orange Green Brown

White solid/Brown band Video (T)

Brown solid/White band Video (R)

Green solid/White band Power (Black wire)

White solid/Green band Power (Red wire)

White solid/Orange band Power (Red wire)

Orange solid/White band Power (Black wire)

White solid/Blue band Control +

Blue solid/White band Control -

Pair 1 Pair 2 Pair 3 Pair 4