Important Safety Precautions When using your Tune Beat Bluetooth Headphones, basic safety precautions should always be followed, including the following: 1. READ ALL INSTRUCTIONS BEFORE USING YOUR HEADPHONES. 2. Do not use your headphones near water. Clean using a dry or slightly moist cloth. 3. Do not place your headphones on any wet surfaces. 4. Do not allow children or the infirm to play with your headphones without adult supervision. 5. Do not expose your headphones to excessive heat, flames or fire. 6.
Introduction Thank you for purchasing the Muze Tune Beat Bluetooth Headphones, item MUZ4005. You can use your headphones with most smartphones and Bluetooth devices to stream music and enjoy hands-free calling. In order to get the best results when using this device, please read this manual first before using. Package Contents -Muze Tune Beat Bluetooth Headphones -Micro USB Charging Cable -User’s Manual with Warranty Information Specifications Bluetooth Specification: JL5.0 Frequency: 2.4GHZ-2.
Charging Your Headphones Your headphones have a built-in, rechargeable lithium ion battery. To avoid damage, do not attempt to remove the battery. The full performance of the battery is only achieved after a few charging-discharging cycles. Charge the battery fully before first use. To do so, follow the steps below: 1. Connect one end of the included Micro USB charging cable to the charging port on your headphones.
Bluetooth Pairing Your headphones can be paired with most Bluetooth devices. In order to pair your headphones with a smartphone, follow the steps below: 1. Press and hold the ON/OFF button in order to power on your headphones. Once your headphones are powered on, the LED indicator light will rapidly blink red and blue. This indicates that your headphones are in pairing mode. 2. Go to the Bluetooth Manager of your Bluetooth device. 3. Search Bluetooth devices and select “MUZ4005” to start connecting. 4.
Using Your Headphones Powering Your Headphones On and OFF 1. Press and hold the ON/OFF button in order to power on your headphones. If you have paired your headphones to your Bluetooth device previously, they will automatically remain paired each time you power on your headphones. 2. Press and hold the ON/OFF button in order to power off your headphones. Listening to Music • Play/Pause Button : Press to play or pause a track.
Maintenance and Care -Before using your headphones, inspect the ports to make sure that they are clear of dust and debris before charging. -Use a soft cloth to clean your headphones. Never use any harsh chemicals or detergents. Make sure your headphones are dry before using. -When your headphones are not in use, they should be stored in a cool, dry place. -Never tug or yank on the charging cable while it is connected to your headphones. Connect and disconnect this cable as carefully as possible.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Vivitar One Year Warranty This warranty covers the original consumer purchaser only and is not transferable. This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.
Vivitar One Year Warranty (continNO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sakar International is under license. Other trademarks and trade names are those of their respective owners.
