SAFETY PRECAUTION CAUTION: The lightening flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to "dangerous voltage" and to prevent from a risk of electric shock. Warning: To reduce the risk of electric shock, don't open the cabinet. Refer servicing to qualified personnel only. The exclamation point within an equilateral triangle is intended to alert the user to important operating and maintenance (servicing).
WARNING: Use the apparatus only in moderate climates (not in tropical climates). Note: Do not open the cabinet to avoid the unit direct exposure to radiation. Unit Cleaning: After the unit power is turned off, you can clean the cabinet, panel and remote control with a soft cloth lightly moistened with a mild detergent solution. Attachments: Never add any attachments and/or equipment without the manufacturer consent; as such additions may result in the risk of fire, electric shock or other personal injury.
Dolby Digital Audio Coding System All products must be marked with: Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Additionally, software products running on a computer must also be marked with: Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.
Contents Contents 1. Remote Control & Panel Description ..................................................................3 1.1 Front Panel Description ....................................................................................... 3 1.2 Rear Panel Description........................................................................................ 4 1.3 Remote Control Description ................................................................................ 5 2. Basic Operations ..................
Contents 5.3 Sleep Timer ....................................................................................................... 28 5.4 Local Time Setting............................................................................................. 28 5.5 Parental Lock .................................................................................................... 29 5.6 Power setting..................................................................................................... 30 6. Utility.......
Remote Control & Panel Description 1. Remote Control & Panel Description 1.1 Front Panel Description 1. POWER: Is used to switch between the working mode and the standby mode. 2. CH+/-: To change channels or for navigating and changing values in menus. 3. Display (4-Digit/7-Segment): Displays the received channel number while operating and time while in standby mode. 4. Remote Sensor: Detects the infrared signals from the remote control unit.
Remote Control & Panel Description 1.2 Rear Panel Description 1. 2. 3. 4. 5. 6. 7. 8. IF IN: S/PDIF: VIDEO: AUDIO: TV SCART: USB: HDMI: AC IN: Satellite input. Coaxial output for digital audio (AC3). CVBS video output for TV AV in. HiFi outputs for stereo set. Output SCART for the connection to a TV set. To connect with USB disk. HDMI output for the connection to a TV set.
Remote Control & Panel Description 1.
Basic Operations 2. Basic Operations 2.1 Switch on STB Switch the [Device’s Main Power] switch on. When the STB is first used it will display “Quick Setup” window. you will set Language, First Audio, Second Audio, LNB Power, Antenna Setup and Multi Search. ? Frequently Asked Question Q: The power of my STB is on and it is running in TV mode but the TV screen shows nothing: A: Make sure the TV set has been set to the correct video input(not the TV channels).
Basic Operations 2.3 Mute 1. 2. Press the [Mute] button to mute the sound. On the screen an icon will be displayed to indicate the muted sound. Press the [Mute] button again to restore the sound. 2.4 Channel Number In TV mode you can enter the channel number directly with your remote control unit and confirm the number with the OK button to change to the desired channel. 2.5 SAT 1. 2.
Basic Operations 2.10 V◄/► In TV/Radio mode, press [Vol◄/►] to adjust volume. 2.11 OK 1. 2. 3. 4. 5. 6. 7. In TV mode press [OK] button to open the Channel List window. Press the [Red] exchange screen. Press [Green] button to sort the channels by free and scrambled channels. Free channel are listed first and scrambled channels last Press [Yellow] button to open the SAT list. After selecting a satellite the channel list will be reduced to the channels of this satellite.
Basic Operations 2.13 EPG The STB supports Electronic Program Guides (EPG) to give you information about the actual programs of certain channels like event name, subtitle, description, start and finish time. This feature is depending on the service of the channel provider. Press [EPG] to open the EPG window. 1. You can move the highlighted channel with [CH ▲ / ▼ ] and preview the highlighted program in the preview window. with [Vol◄/►] and display the event’s detailed description. 2.
Basic Operations 2.15 SUB In “Subtitle Display”menu. Subtitle: Press [VOL◄/►] to select “standard” or “Off”. Press [Vol◄/►] to select languages. If the current channel has subtitle information, it will be displayed if this function is “On”. If this function is “Off” subtitles won’t be displayed. 2.16 ZOOM 1. 2. 3. 4. The [Zoom] key allows you to magnify a certain area on the images and the current screen will show Press [Zoom] key again, the image will enlarge rotate as x1, x2, x4, x6, x8, x12, x16.
Basic Operations 2.18 ■ When you play a recorded program, press [■] button will stop the recorded channel playing and back to the Record Management menu. When you are recording a program, press [■] button you will be asked to “Do you want to stop record?” menu. ● 2.19 In TV mode, press [ ] button you will be asked to “Do you want to record?” menu. ● 2.20 FAV 1. In TV mode press the [FAV] button to display the Favorite Group window on the screen as the picture beside shows. 2.
Basic Operations 2.21 ►II When you play a current or recorded program, press [►II] will stop the program, press [►II] again will play the program continually, And Timeshift is started by this key. 2.22 ◄◄/►► When you play a recorded channel, press [◄◄] button to back the program fast and Press [►►] to fast forward the program. Selection: 2x, 4x, 8x speed . 2.
Menu Operations 3. Channel Manager Press [Menu] in the TV/radio mode to enter the main menu. 1. Press [CH▲/▼] to select the channel item. 2. Press [OK] to enter the selected item. In the channel menu: Press [CH▲/▼] to select the wanted menu item among TV Channel List, Radio Channel List, Channel setup, Favorite group list name and Delete All. Press [OK] to enter the selected item. 3.1 TV List If you enter the channel list menu a window like the one below will open. 1.
Menu Operations 3.1.1 Favorite 1. Press [FAV] to open the favorite window. 2. You can select between 32 favorite groups with [CH▲/▼]. Press [OK] to assign the channel to a favorite group, press [EXIT] to exit favorite group. 3. Press [OK] again to remove the channel from the marked favorite group. 4. Press [MENU] button you will be asked “Are you sure to save?”. Select “Yes” to save the marked favorite group. Select “No” to cancel the operation. 5. To return to the TV channel list.
Menu Operations 3.1.3 Sort Press [Green] to open the sort window. Press [CH▲/▼] to select and [OK] to confirm your choice. The ways of sorting are: ♦ Default: Sort channel factory default. ♦ FTA/CAS: Sort channel by free and scrambled sequence. Free channels will be listed first and scrambled channels behind in the channel list. ♦ Lock: Unlocked channels are listed first end locked channels at the end. ♦ Name(A-Z): Sorting in Alphabetical order, ignoring “$” symbol.
Menu Operations 3.1.4.2 Skip In channel edit menu, press [Green] button to place a skip icon behind the name of the highlighted channel. Marked channels will be skipped when you change channels in TV mode after you confirm to save the changes when you leave this menu. 3.1.4.3 Lock In channel edit menu, press [Yellow] button to place a lock icon behind the name of the highlighted channel.
Menu Operations 1. 2. 3. 4. Press [OK] on the “Satellite” item to display the satellite list. You can select the satellite for which you want to create a new channel. With marked “TP Index” item press [OK] to display TP list, use [CH▲/▼] to select for which you want to create a new channel. Press [OK] to display the TP number where the channel can be found. The next three items will show the related parameters.
Menu Operations 4. Installation After selecting the installation menu you can see the window like beside. In “Installation” menu; 1. Press [CH▲/▼] to select menu items among Single Search, Multi Search, TP Scan, Satellite List, TP List ， Satellite Guide and Unicable Configuration. 2. Press [OK] to enter the selected item. 4.1 Single Search After selecting “Single Search” you will see a window like beside: 1.
Menu Operations ! Notice: After choosing LNB type “Universal” you cannot modify 22K. 3. 4. 5. 6. 7. 8. DiSEqC1.0: Use [Vol◄/►] to switch the options or press [OK] to open the DiSEqC1.0 option list to select directly with [CH▲/▼], press [OK] to confirm it. DiSEqC1.1: Use [Vol◄/►] to switch DiSEqC1.1 option or press [OK] to enter DiSEqC1.1 option to select directly with [CH▲/▼], press [OK] to confirm it.
Menu Operations 4.2 Multi Search When you enter the “Multi Search” menu a window like the one beside will open. 1. In the “Satellite” item press [Vol◄/►] to select the satellite which you want to scan or press [OK] to open the “satellite list” to select directly with [CH▲/▼], and press [OK] to mark/unmark and [MENU] to finish the selection. You can select several satellites in this menu. The system will use DiSEqC1.0/1.1, DiSEqC1.2 and USALS functions to search the marked satellites and scan channels. 2.
Menu Operations 2. TP Index: Use [Vol◄/►] to select the desired transponder or press [OK] to open the TP list to select directly with [CH▲/▼], press [OK] again to display the TP number where the channel can be found. Press [Red / Green / Yellow] key on the RCU for the related functions. ♦ When you press [Red] it will display “New TP” in “TP Index” item. You have to set the parameters of “TP Frequency”, “Symbol Rate” for this new transponder. Therefore use the number buttons of the RCU.
Menu Operations 5. 22K: Use [Vol◄/►] to switch “ON” and “Off”. The 22KHz signal is used in KU universal LNBs to change between low band and high band. ! Notice: After choosing LNB type “Universal” you cannot modify 22K. DiSEqC1.0: Use [Vol◄/►] to switch the options or press [OK] to open the DiSEqC1.0 option list to select directly with [CH▲/▼], press [OK] to confirm it. DiSEqC1.1: Use [Vol◄/►] to switch DiSEqC1.1 option or press [OK] to enter DiSEqC1.
Menu Operations 1. Press [Red] button to enter edit satellite menu. You can edit the satellite’s name and its longitude. 2. Press [Green] button to open the “Add satellite” window. 3. After pressing [Yellow] button you will be asked “Are you sure to delete?”. Select “OK” to delete the marked satellite. Select “Cancel” to cancel the operation. 4.5 TP List When you open the “TP List” menu you will see a window like the one beside. 1. Press [Vol◄/►] to change the marked satellite.
Menu Operations 2. Press [Red] button to open the “Edit TP” menu. Here you can edit the transponder’s data. 3. Press [Green] button to open the “Add TP” menu. Here you can add a new TP and setup its parameters. 4. Press [Yellow] button will open a dialog box asking you to confirm the deletion of the current TP. If you select “OK” all the related channels will be deleted. If you select “Cancel” the operation will be cancelled. 5.
Menu Operations 4.6 Satellite Guide When you enter “Satellite Guide” menu, you will see the screen like beside: Here you can enter your local longitude and latitude and the satellite’s longitude. The receiver calculates the antenna’s orientation and elevation to point your antenna to the selected satellite. 1. Use the [Number] buttons to input the values of “Local Longitude”, “Local Latitude” and “Satellite Longitude”. 2.
Menu Operations 5. Configuration When you open the “System Setup” menu a window like the one beside will be opened. In “System Setup” menu: 1. Press [CH▲/▼] to select menu items among Language, TV System, Time & Timer setting, OSD Setting, Parental Lock and Power setting. 2. Press [OK] to open the selected item. 5.1 OSD Setting After selecting the “Language” menu you will see a window like beside: 1. Menu Language: Press [Vol◄/►] to select languages.
Menu Operations 4. 5. 6. French, Spanish, Italian, Portuguese, Turkish, Polish, Russian, Danish, Greek, Hungarian, Arabic, Farsi and Dutch. Subtitle Language: In “OSD Setting”menu, use [Vol◄/►] to select “On” or “Off”. If the current channel has subtitle information, it will be displayed if this function is “On”. If this function is “Off” subtitles won’t be displayed.
Menu Operations 5.2 TV System When you enter the “TV System” menu you will see the screen like below: 1. Display Mode is used to switch the display mode. You can select from PAL / NTSC. Press [Vol◄/►] to switch the desired mode. 2. Aspect Mode is used to switch the screen aspect ratio mode. You can select the needed mode from Auto / 4:3 PS / 4:3 LB / 16:9 with [Vol◄/►]. 3. Video output is use for switching the screen aspect ratio mode. Now we provide below options: SD / HD.
Menu Operations The “GMT Offset” item is only available when “GMT Usage” is set to “On”. Press [Vol◄/►] to set the “GMT Offset” value. With every time you press the button the time offset will be increased/decreased by half an hour. ♦ Summer: Press [Vol◄/►] to switch this function “On” or “Off”. ♦ “Date” and “Time” items are only available when the “GMT Usage” is set to “Off”. Press [Vol◄/►] to select one item and use number buttons to input time and date directly.
Menu Operations 3. 4. 5. 6. Channel Lock: If set to “Yes” then you need to enter the password before you can see those channels which have been marked as locked channels in the channel menu. If set to “No” then even those channels can be selected without entering the password first. New Menu Password: Here you can change the existing password. You should do this after you set up the receiver the first time and every time when you think that your password is known by unauthorized persons.
Menu Operations 2. 3. 4. 5. LNB Power: If your receiver is connected to the LNB directly then you need to set the LNB Power to “On”. If your receiver is connected to a multi switch (SMATV signal distribution system) then it may be that you don’t need to provide the power to the LNB. But since this is depending on the kind of installed distribution system we recommend you to contact your installer or to refer to the user manual of this system to get the correct information.
Menu Operations 6. Utility When you enter to “Utility” menu, you will see a screen like beside: In “Utility” menu: 1. Press [CH▲/▼] to select the wanted item among Information, Software Upgrade and Factory Default. 2. Press [OK] to enter the selected item. 6.1 Information 1. 2. When you select the “Information” menu you will see a screen like beside. The screen displays data about the current channel. Press [Exit] button to leave the information display. 6.
Menu Operations The last software version to be loaded must be placed at the root path of your USB device. 1. Upgrade Mode: the mode of the upgrade to be choosed, Press [Vol◄/►] to select Software, Whole, User Interface, Default DB, CAS and Ch.List & Setting. 2. In the “Software” item press [Vol◄/►] to select the file which you want to scan or press [OK] to open the “USB list” to select directly with [CH▲/▼], and press [OK] to finish the selection. 3. Start: Press [OK] to start upgrade. 4.
Menu Operations 6.2.3 OTA Upgrade This function can upgrade the software of your receiver through data sent by a satellite. At the moment we offer satellite updates only through ASTRA1 and Hotbird satellites. 1. Select the satellite and TP or input the TP value and download PID. 2. Then mark “Start” and press [Enter] to begin the download of the upgrade. This may need up to 60 minutes. Therefore we suggest using of this function only if you don’t intent to watch TV during this time. 3.
Menu Operations 7. USB Press [CH▲/▼] to select the wanted item partition. Press [Red] button to open the “Rename” window like showed beside. Press [CH▲/▼] / [Vol◄/►] to select the leading character of the channel name and press [OK] to confirm it. If you enter the USB menu a window like the one below will open. 1. Press [Vol◄/►] select the all, mp3, image, video, music list, picture list, video list, Record list. 2.
Menu Operations 1. ♦ ♦ ♦ Rename Press [Red] button to open the “Rename” window like showed beside. Press [CH▲/▼] / [Vol◄/►] to select the leading character of the channel name and press [OK] to confirm it. After entering the character(s) highlight “OK” in the window and press [OK] on the RCU. Press [Exit] button to close the find window and brings you back to the Record list. 2. Delete In all edit menu press [Green] button will open another window where you can choose between delete one and delete all.
Menu Operations 3. ♦ ♦ 4. ♦ ♦ ♦ b) Press [MENU] button you will be asked “Are you sure to save?”. Select “OK” to delete all “mp3 / image / video”. Select “Cancel” to cancel the operation. Move Press [Yellow] button to show a moving icon behind the “mp3 / image / video / folder” name. Move the “mp3 / image / video / folder” to the desired folder list with [CH▲/▼]. Press [OK] to confirm the position. Folder Press [Blue] button to open the “New Folder” window like showed beside.
Menu Operations ♦ Add All a) Press [Green] button to show a add icon behind all “mp3 / image / video” name. b) Press [MENU] button you will be asked “Are you sure to save?”. Select “OK” to add all “mp3 / image / video”. Select “Cancel” to cancel the operation. [Find] Press [Blue] button to open the “Find” window like showed beside. Press [CH▲/▼] / [Vol◄/►] to select the leading character of the channel name and press [OK] to confirm it.
Menu Operations 7.2 Music Basically the operation of “mp3” is same as “all”. 7.3 Picture Basically the operation of “Picture” is same as “all”, except that in the Yellow buttons offer further functions to manage. In image menu press [Yellow] button will open another window. press [Red] to set the image as background. press [Green] to delete the image as background. 7.4 Video Basically the operation of “video” is same as “all”. 7.5 Music List The color buttons offer further functions to manage.
Menu Operations 7.6 Picture List Basically the operation of “Picture List” is same as “Music List”, except that in the Yellow (Setup) buttons offer further functions to manage. Press [Yellow] button to open the “Setup” window. Select the item you want to adjust with [CH▲/▼] and change the value with [VOL◄/►] Size: Full and Real. Time: 0 Sec, 1 Sec, 2 Sec, 3 Sec, 4 Sec, 5 Sec, 6 Sec, 7 Sec, 8 Sec and 9 Sec. Repeat: On and Off. Effect: Normal, Shutters, Brush, Slide, Random and Fade. Mp3: On and Off. 7.
Menu Operations 3. Press [Exit] button to close the find window and brings you back to the Record list. [Lock] In channel Record menu, press [Green] button to place a lock icon behind the name of the highlighted Record. Marked Records will be locked and displayed only after password has been entered if you confirm to save the changes when you leave this menu. [Copy] In channel Record menu, press [Yellow] button copy the recorded programme to another disk.
Menu Operations ♦ Del All c) Press [Green] button to show a add icon behind all image name. d) Press [MENU] button you will be asked “Are you sure to save?”. Select “OK” to add all image. Select “Cancel” to cancel the operation.
Menu Operations 8. PVR When you enter to “PVR” menu, you will see a screen like beside: In “PVR” menu: 1. Press [CH▲/▼] to select the Record Management, Timer, PVR Options and Disk Information. 2. Press [OK] to enter the selected item. 8.1 Record Management Basically the operation of “Record Management” is same as “USB”, 8.2 Timer When you enter “Time & Timer Setting” a menu with this 3 items will be opened. 3. Timer: Select “Timer” item and press [OK] to enter the “Timer” menu.
Menu Operations Wakeup Channel: Press [OK] to enter the channel list, and select the channel you want to see with [CH▲/▼], press [OK] to confirm it. ¾ Wakeup Date: Use number buttons to input your wakeup date. ¾ On Time: Use number buttons to input your wakeup time. If date and time are reached then no matter if the system is in standby mode or in playing mode, it will automatically switch to the channel you set and start to play. ¾ Duration: Here you can set the time you want to see or play this channel.
Menu Operations 8.3 PVR Options 1. Reserved TMS Size: Press [Vol◄/►] 2. 3. 4. 5. to switch between “0 MB / 200 MB and 500 MB”. Select “MENU / EXIT”, press [MENU / EXIT] to reset to make tms size valid now. Select “Cancel” press [OK] to cancel the operation. Jump Step Value: Press [Vol◄/►] to switch between “1 mins / 3 Mins / 5 Mins / 10 Mins / 15 Mins”. The value control the step of I◄◄/►►I operation. Record Type: Press [Vol◄/►] to switch between “TS and PS”.
Technical Specification 9.
Technical Specification MISCELLANEOUS Supply voltage Power consumption Operation temperature Storage temperature Dimension (W * D * H) Weight 100-240VAC, 20V,0.8A Max. 16 watts +5° to +40° -20° to +70° 160 * 140 * 40 mm 0.
