SAFETY PRECAUTION CAUTION: The lightening flash with Warning: The exclamation point within an arrowhead symbol, within an To reduce the risk of electric equilateral triangle is intended to equilateral triangle, is intended shock, don't open the cabinet. alert the user to important to alert the user to "dangerous Refer servicing to qualified operating and maintenance voltage" and to prevent from a personnel only. (servicing). risk of electric shock.
Unit Cleaning: After the unit power is turned off, you can clean the cabinet, panel and remote control with a soft cloth lightly moistened with a mild detergent solution. Attachments: Never add any attachments and/or equipment without the manufacturer consent; as such additions may result in the risk of fire, electric shock or other personal injury. Locating: Slots and openings in the cabinet are provided for ventilation to protect it from overheating.
Contents Contents 1 Remote Control & Panel Description ....................................................................................... 3 1.1 Front Panel Description ............................................................................................................3 1.2 Rear Panel Description .............................................................................................................4 1.3 Remote Control Description ...........................................................
Contents 3.2 3.3 3.4 3.5 3.1.1 Antenna Connection .....................................................................................................16 3.1.2 Satellite List ..................................................................................................................16 3.1.3 Antenna Setup ..............................................................................................................16 3.1.4 Single Satellite Search ....................................................
Remote Control & Panel Description 1 Remote Control & Panel Description 1.1 Front Panel Description 1. POWER: Is used to switch between the working mode and the standby mode. 2. VOL+/-: To change volume to move cursor, change numbers in the menu or to change the 3. MENU: To enter into the main menu and exit all menus. 4. OK: To select an item in the menu and confirm it or pop up channel list when no menu. 5. CH+/-: To change channels or for navigating and changing values in menus. choice.
Remote Control & Panel Description 1.2 Rear Panel Description 1. RS-232: Serial Port allowing software upgrades. 2. IF IN: Satellite input. 3. IF OUT: Satellite output for cascading to other devices Note: The operation of another receiver at the same time is only possible with limited channel selection. 4. S/PDIF: Coaxial output for digital audio (AC3) 5. VIDEO: CVBS video output for TV AV in. 6. AUDIO: HiFi outputs for stereo set. 7. USB: To connect with USB disk. 8.
Remote Control & Panel Description 1.
Basic Operations 2. Basic Operations 2.1 Switch on STB Switch the [Device’s Main Power] switch on. When the STB is first used it will display “Quick Setup” window. you will set Language, First Audio, Second Audio, LNB Power, Antenna Setup and Multi Search. ? Q: Frequently Asked Question The power of my STB is on and it is running in TV mode but the TV screen shows nothing: A: Make sure the TV set has been set to the correct video input (not the TV channels).
Basic Operations 2.4 Audio 1. In TV mode, press the [Audio] button to open the Audio Mode window. 2. Select the item you want to adjust with [CH▲/▼] and change the value with [VOL◄/►]. 2.5 TV/STB Switch TV output from STB to VCR Scart. 2.6 TV/Radio In TV mode, press [TV/Radio] to switch to Radio mode. In Radio mode press [TV/Radio] again to switch back to TV mode. 2.7 SLEEP Press [SLEEP] button in TV mode to set the sleep timer. You will see “SLEEP TIME OFF / SLEEP TIME 10 ~ SLEEP TIME 120”.
Basic Operations 2.10 P/N In TV mode, press [P/N] button to display Mode is used to switch the display mode. 2.11 Recall Pressing the [Recall] button allows you to toggle between the actual and the last selected channel. 2.12 Channel Number In TV mode you can enter the channel number directly with your remote control unit and confirm the number with the OK button to change to the desired channel. 2.13 PGUP / PGDN In TV mode, press [PGUP / PGDN] to switch directly between satellites. 2.14 SAT 1.
Basic Operations 2.15 FAV +/1. In full screen, press [FAV +/-] keys can switch the favorite channels in current satellite channels list directly. 2. The sequence of the switch favorite channels is following the sequence that in the current satellite channel list, not follow the sequence in the favorite group. 2.16 EPG The STB supports Electronic Program Guides (EPG) to give you information about the actual programs of certain channels like event name, subtitle, description, start and finish time.
Basic Operations 2.17 FAV In TV mode press the [FAV] button to display the Favorite Group window. 1. In the Favorite Group window you can select the desired favorite channel with [CH▲/▼] 2. Press [VOL◄/►] to switch Favor Group 1 ~ Favor Group 5. 3. Press [Exit] to close the Favorite Group window. and confirm it with [OK] to switch to it. In bigger groups you can navigate with [Pgup/ Pgdn].
Basic Operations 1. In TV mode press [OK] button to open the Channel List window. 2. Press [CH▲/▼] to switch channel and confirm it with [OK] to switch to it. 3. The color buttons offer further functions to manage the channel list. Press [Red] to open the sort window. Press [CH▲/▼] to select and [OK] to confirm your choice. The ways of sorting are: Default: Sort channel factory default. FTA/CAS: Sort channel by free and scrambled sequence.
Basic Operations 2.21 MENU Press [Menu] button to enter or exit the current menu. 2.22 EXIT Press [Exit] button to exit the current menu. 2.23 PAUSE 1. In playing mode, press [PAUSE], the picture will be paused, but the sound of the channel will still continues. 2. Press [PAUSE] again, the screen’s picture will skip over to the current playing picture, and the sound of the channel will corresponding playing. 2.24 Zoom In TV mode, press [Zoom] to enter the “MULTI” menu. 1.
Basic Operations 2. Press [Zoom & OK] key again, the image will enlarge rotate as x1, x2, x4, x6, x8, x12, x16. 3. In “x2 ~ x16” image, using [CH▲/▼ / VOL◄/►] keys to move the image center area you want to see. 4. In zoom mode, press [Exit] to close “Zoom” window. 2.25 EDIT In TV mode, press [EDIT] button to access directly to the “TV Channel List” menu or to the “Radio Channel List” menu. 2.
Basic Operations 2.31 T.S. In TV mode, press [TIME SHIFT] button you will be asked to “Do you want to time shift “ menu. 2.32 GOTO Without function. 2.33 ◄◄/►► When you play a recorded channel, press [◄◄] button to back the program fast and Press [►►] to fast forward the program. Selection: 2x, 4x, 8x speed . 2.34 ►II When you play a current or recorded program, press [►II] will stop the program, press [►II] again will play the program continually, And Timeshift is started by this key. 2.
Menu Operations 3 Menu Operations Press the [MENU] button to display the main menu. And menu is a field of text shown on the TV screen, the selected item is generally become red background. Use the [CH▲/▼ / Vol◄/►] button you can move, upwards / downwards and leftwards / rightwards s in the menu. When you have reached the required subject menu, press the [OK] button to confirm your selection. When you want to return to the previous mode, press the [EXIT] button. 3.
Menu Operations 3.1.1 Antenna Connection In “Antenna Connection” menu; In the “LNB1” item: Press [Vol◄/►] to switch between Motor Antenna and Fixed Antenna. 3.1.2 Satellite List In “Satellite List” menu; 1. Press [Red] button to enter edit satellite menu. You can edit the satellite’s name and its longitude. 2. Press [Green] button to open the “Add satellite” window. 3. After pressing [Blue] button you will be asked “Are you sure to delete?”. Select “OK” to delete the marked satellite.
Menu Operations 1. In the “Satellite” item press [OK] to select the “satellite list” to select directly with [CH▲/▼], press [OK] to confirm it. 2. In the “LNB Type” item press [OK] to select the “LNB Type list” to select directly with [Vol◄/►], press [OK] to confirm it. 3. In the “Transponder” item press [OK] to select the “Transponder list” to select directly with 4. In the “DiSEqC1.0” item press [OK] to select the “DiSEqC1.0 list” to select directly with 5.
Menu Operations 2. FTA Only: Press [Vol◄/►] to select to scan only free channels or even scrambled channels. If you select “Yes” it will scan free channels only. 3. Scan Channel: Press [Vol◄/►] to select to scan TV + radio, or just TV or just radio. 4. Network Search: Press [Vol◄/►] to select to scan Yes or No. 5. Scan Mode: You can select “Auto Scan” or “Preset Scan” to blind scan preset transponders 6. Search: Press [OK] to start scanning.
Menu Operations 3.2 Edit Channel After Edit Channel the Settings menu you can see the window like. In “Edit Channel” menu; Press [CH▲/▼] to select menu items among TV Channel List, Radio Channel List and Delete All. 3.2.1 TV Channel List In “TV Channel List” menu; 1. You can move the highlighted channel with [CH▲/▼] and press [OK] to preview the highlighted program in the preview window. 2. Press [◄◄/►►] on the RCU to jump between the channels by pages. 3.
Menu Operations 3.2.2 Radio Channel List Basically the operation of “Radio Channel List” is same as “TV Channel List”, except that in the small channel window the radio Logo will be displayed. 3.2.3 Delete All To delete all channels: 1. Enter the password. The default password is “0000”. 2. After entering the password correct a safety question will show up where you have to 3. Select “OK” to delete all channels or “Cancel” to cancel the operation and confirm with [OK]. 4.
Menu Operations 3.3 System Setup After System Setup the Settings menu you can see the window like. In “System Setup” menu; Press [CH▲/▼] to select menu items among Language, TV System, Display Setting, Local Time Setting, Parental Lock, OSD Setting, Favorite, Other. 3.3.1 System Setting In “System Setting” menu; 1. In the “menu language” item press [OK] to select directly with [CH▲/▼], press [OK] to confirm it.
Menu Operations 4. Subtitle Language: In “OSD Setting” menu, use [OK] to select directly with [CH▲/▼] to select “On” or “Off”. If the current channel has subtitle information, it will be displayed if this function is “On”. If this function is “Off” subtitles won’t be displayed. The selections of subtitle language include: English, German, French, Spanish, Italian, Portuguese, Turkish, Polish, Russian, Danish, Greek, Hungarian, Dutch, Arabic, Farsi. 3.3.2 TV System In “TV System” menu; 1.
Menu Operations 3.3.3 Display Setting In “Display Setting” menu; 1. Video Resolution: Press [OK] to select directly with [CH▲/▼] to switch between 0~100. 2. Contrast: Press [OK] to select directly with [CH▲/▼] to switch between 0~100. 3. Saturation: Press [OK] to select directly with [CH▲/▼] to switch between 0~100. 4. Hue: Press [OK] to select directly with [CH▲/▼] to switch between 0~100. 5. Sharpness: Press [OK] to select directly with [CH▲/▼] to switch between 0~10. 6.
Menu Operations 3. The “GMT Offset” item is only available when “GMT Usage” is set to “On”. Press [Vol◄/►] to set the “GMT Offset” value. With every time you press the button the time offset will be increased /decreased by half an hour. 4. Summer Time: Press [Vol◄/►] to switch this function “On” or “Off”. 5. “Date” and “Time” items are only available when the “GMT Usage” is set to “Off”. Press [Vol◄/►] to select one item and use number buttons to input time and date directly. 6.
Menu Operations 7. PS Record: Press [Vol◄/►] to switch this function “No” or “Yes”. 8. Press [Save] to confirm it. Press [Cancel] to leave the “Time Setting” menu. 3.3.6 Parental Lock In “Parental Lock” menu; You can set a password for anyone who wishes to operate the “Installation” menu. You can also set the password to lock channels. Below you find how to set and change the password. 1. On “Parental Lock” press [OK] to open a dialogue box and input the password.
Menu Operations 3.3.7 OSD Setting In “OSD Setting” menu; 1. OSD Timeout: This setting determines the duration the info window is displayed on the screen when you change channels. Press [Vol◄/►] to set the time between 1 to 10 seconds. 2. OSD Transparency: With this parameter you can set the transparency of the menus. Press [Vol◄/►] select the value between 10%, 20%, 30%, 40% and “Off”(means no transparency function). 3. Press [Exit] button to leave the “OSD Setting” menu. 3.3.
Menu Operations After modification select “OK” of button bar and press [OK] on the RCU to rename the favorite group name and leave the edit mode. Press [Exit] on the RCU to exit the edit mode without saving the favorite group name. 3.3.9 Other In “Other” menu; 1. LNB Power: If your receiver is connected to the LNB directly then you need to set the LNB Power to “On”.
Menu Operations 3.4 Tools After Tools the Settings menu you can see the window like. In “Tools” menu; Press [CH▲/▼] to select menu items among Information, Factory Setting, S/W Upgrade by OTA. 3.4.1 Information When you select the “Information” menu you will see a screen like beside. On the right of the screen displays data about the current system.
Menu Operations 3.4.2 Factory Default When you press [OK] on the “Factory Default” item: A dialogue box will occur where you need to enter the password. After you input the correct password a warning message will be displayed like the one beside. If you select “Yes” then all changes you made will be reset to default values. Make sure you really want to do this! Press [Exit] in both steps will close the window without resetting the receiver. NOTE: The default password is 0000. 3.4.
Menu Operations 3.5 Network In “Network” menu; Press [CH▲/▼] to select menu items among Network Setting, Ethernet Setting, WiFi Manager, Weather. 3.5.1 Network Setting In “Network Setting” menu; Press [Vol◄/►] to switch between Ethernet or WiFi. Warning message will be displayed like the one beside. Press [OK] to confirm it. Press [Cancel] and [Exit] button to leave the “Network Setting” menu.
Menu Operations 3.5.2 Ethernet Setting In “Ethernet Setting” menu; The STB must be switched off. Please connect your STB with the Internet-Router via the Ethernet Cable (RJ45) (not part of the delivery). Press [Vol◄/►] to switch between Off or On. Press [OK] to confirm it. Press [Cancel] and [Exit] button to leave the “Network Setting” menu.
Menu Operations 1. WPA/WPA2 mode Enter the correct password. You can see below menu: “Red” button means back step, “Yellow” button means shift input method. 2. WEP mode user have to select the key number among KEY_1~KEY_4. user have to enter the correct password. 3.5.4 Weather The correct network configuration allows receiving actual Weather data. Display of the current temperature. Display of the humidity. Display of the lowest and highest temperature of the day and next day’s preview.
Menu Operations 3.5.5 Flickr The main menu contains 4 modules: Date, Recent, Tag Search and Search You can choose their way to share the photos list, and you can choose a photo to show the full screen by photo size (small, middle, original) Date You can input Date, Photos count and Page Number. Then start to download date interesting photos. Date—Default is 2009-01-01. Today and yesterday’s photo sets manybe are null. Photos count—Default is 24, max is 30. Page Number—Default is 1, max is 80.
Troubleshooting 4 Troubleshooting There may be various reasons behind receiver problems. Check the receiver according to the procedures described below. If you can’t solve your problem even after following the troubleshooting procedures, please contact the dealer, Do not open the receiver cover, it may cause a dangerous situation.
Technical Specification 5 Technical Specification VIDEO Decoding MPEG-4 & MPEG-2 & MEPG-1 compatible Bit rate Max 15Mbps Output PAL/NTSC Aspect ratio 4:3, 16:9, Auto Active pixel SD: 720x480 @ 30fps; 720x576 @ 25fps HD: 480p, 576p, 720i, 720p, 1080i Output connector RCA, HDMI AUDIO Decoding MPEG-4/MPEG-2/MPEG-1 layer I & II Mode Mono, Dual, Stereo, Joint stereo Bit rate Max 384Kbps DEMODULATOR Demodulation QPSK & 8PSK Symbol rate SCPC/MCPC Outer code RS (204, 188, 8) Inner code ALL