Operation Manual

QUICK INSTALLATION GUIDE
V1.0 13
IX. SPECIFICATIONS
1. Conditional Access Module Interface
Item Specification
SMART CARD (Optional) 2 SLOT, ISO 7816, GSM11.11 and EMV (payment systems)
compatibility
2. Tuner & Channel
Input Connector F-type (Output loop-through), IEC 169-24, Female
Signal Level -25 to -65 dBm
LNB Power Vertical : +13.5/18.5Vdc±5%
Polarization Horizontal : +18.5Vd dc±
Current: Max.500mA.Overload protected
22KHz Tone Frequency : 22KHz±2KHz
DiSEqC Control Amplitude : 0.8±0.2V
Version 1.2 USALS Compatible
Demodulation QPSK
Input Symbol Rate 2~45Ms/s Convolution Code Rate
1/2, 2/3, 3/4, 5/6, 7/8 with Constraint Length K=7
3. A/V & Data In/Out
TV Scart Output CVBS, RGB, L, R Output with Volume Control
RCA Output CVBS(Yellow), L, R Output(White, Red)with Volume Control
Digital Bitstream out (Coaxial) Bit Rate 115,200baud
Data Interface Connector 9-Pin D-Sub Male type
USB Type A Connector
4. MPEG Transport Stream & A/V Decoding
Transport Stream MPEG-2 ISO/IEC 13818 / Transport stream Specification
Profile Level MPEG-2 MP@ML, MP@ML, MPEG-4 H.264/AVC
Input Rate Max 90 Mbit/
Video Resolution 576i, 576P, 720p, 720i, 1080i
Aspect Ratio 4:3, 16:9
Audio Decoding MPEG/Musicam Layer I & II
Audio Mode Single channel/Dual channel Joint Stereo/Stereo
Teletext VBI & OSD(Optional)
Sampling Rate 32,44.1 and 48KHz
5. Power Supply
Input Voltage AC 90 to 250V, 50~60Hz
Power Consumption Max 30W
Protection Separate Internal Fuse
Type SMPS